Aquibond
SA Primer // Spray Grade

Water based primer for self-adhesive waterproofing membranes and AVCL’s 

Aquibond SA Primer / Spray Grade in a Ring and Latch Pail

Aquibond SA Primer Spray Grade (SG), is a low viscosity synthetic polymer emulsion for preparing a wide range of substrates prior to receiving self-adhesive waterproofing membranes and AVCL’s.  Through the use of a self-adhesive primer membranes will see a dramatic increase in bond strength to the substrate, especially in colder climates. 

Aquibond SA Primer SG is both high solids content formulation as well as being low viscosity allowing it to be sprayed airlessly through the use of simple spray pump, maximising both coverage rate and speed of application. Airless spraying the primer also dramatically reduces the drying time on the substrate further decreasing the installation time. Alternatively the product is also available in a roller applied grade.

The Aquibond SA Primer SG is hazard free and contains no harmful solvents, making it the ideal solution for low hazard waterproofing systems or for where the intended projects are in sensitive areas such as occupied schools and hospitals. 

  • Instant grab
  • No harmful solvents
  • Quick drying
  • High solids formulation
  • Hazard free
  • High levels of tack
  • Instant grab
  • No harmful solves
  • Quick drying
  • High solids formulation
  • Hazard free
  • High levels of tack

Pack Sizes:

Available packaged to specification

View the full Aquibond range here.

Compatible Substrates
  • High Density Gypsum Board
  • Calcium Silicate Boards
  • Concrete
  • Masonry
  • Perlite
  • Various metals
  • Fibre cement sheet
  • Extruded Polystyrene
  • Expanded Polystyrene
  • VIP Panels
  • Polyurethane liquid coatings
  • Glass tissue faced PIR / PUR
  • Foil faced PIR / PUR
  • Stone wool insulation
  • Cellular glass
  • SBS Bituminous Membranes
  • Mastic Asphalt
  • Oriented strand board
  • Plywood
  • Timber
The information presented on this product overview is not intended as a formal technical specification and should only be taken as a guideline. We recommend that adhesion tests are carried out before application. Should you have any queries please contact our technical department for further assistance.
Scroll to Top

Safety Data Sheet Request​

Fill in your details below and a member of our team will contact you as soon as possible

Technical Data Sheet Request​

Fill in your details below and a member of our team will contact you as soon as possible

Can't find what you're looking for?

Fill in your details below and a member of our team will contact you as soon as possible

TDS Request

Fill in your details below and a member of our team will contact you as soon as possible