alt

Spraybond®
pvc Adhesive

Canister applied PVC Adhesive for bonding non-fleece backed and fleece backed PVC single ply membranes

Spraybond PVC Adhesive in Canister

Spraybond® PVC adhesive was developed to allow for simple, uniform and accurate application on-site whilst decreasing both application and the cure time. Spraybond® PVC adhesive is suitable for bonding both non-fleece backed and fleece-backed PVC single-ply membranes, allowing it to hold fleece membranes in place quickly with its high tack and grab if required.  

As the product is sprayed it ensures a consistent coat of adhesive is achieved, which can be time-consuming when using roller-applied adhesives thus Spraybond® PVC adhesive halves the application time compared with roller application. Due to the extremely high-tack nature of the product, you can be confident of a simple installation when bonding on vertical details, saving time and ensuring the installation goes smoothly.

Spraybond® PVC adhesive has a significant advantage over traditional rubber-based adhesive for bonding PVC single-ply membranes as it’s manufactured using the latest polyurethane technology. The polyurethane formulation gives a significantly increased performance in terms of bond strength and extremely high-temperature resistance. This ensures that even in the harshest climates Spraybond® PVC adhesive will perform as required.

  • High temperatures resistance
  • Rapid and accurate application
  • High solids content
  • Non-Chlorinated Solvents
  • Suitable for vertical applications
  • Strong, permanent polymeric bond
  • High temperatures resistance
  • Rapid and accurate application
  • High solids content
  • Non-Chlorinated Solvents
  • Suitable for vertical applications
  • Strong, permanent polymeric bond
View the full Spraybond® range here.
Compatible Insulation
  • Glass tissue faced PIR / PUR
  • Foil faced PIR / PUR
  • Cellular glass
  • Stone wool insulation
  • VIP Panels
The information presented on this product overview is not intended as a formal technical specification and should only be taken as a guideline. We recommend that adhesion tests are carried out before application. Should you have any queries please contact our technical department for further assistance.
Compatible Substrates
  • Calcium Silicate Boards
  • Concrete
  • Masonry
  • Perlite
  • Various metals
  • Fibre cement sheet
  • SBS Bituminous Membranes
  • High Density gypsum Board
  • Oriented strand board
  • Plywood
  • Timber
  • Polyurethane liquid coatings
ANCILLARY PRODucts
DT-SG

DT-SG (600mm Extended Spray Gun)

DT-STD - Spray Gun

DT-STD Detail Gun

PTFE Hose

PTFE Braided Hose (3.6m / 8m)

Canister Cleaning Adapter

Cleaning Adaptor

Canister Cleaning Aerosol​

Spraybond Cleaning Aerosol

DT-SG

DT-SG (600mm Extended Spray Gun)

DT-STD - Spray Gun

DT-STD

Detail Gun

PTFE Hose

PTFE Braided Hose (3.6m / 8m)

Canister Cleaning Adapter

Cleaning

Adaptor

Canister Cleaning Aerosol​

Spraybond

Cleaning Aerosol

Scroll to Top

Safety Data Sheet Request

Fill in your details below and a member of our team will contact you as soon as possible

Technical Data Sheet Request

Fill in your details below and a member of our team will contact you as soon as possible

Can't find what you're looking for?

Fill in your details below and a member of our team will contact you as soon as possible